Energex first, if the street is the problem
The distributor for this city is Energex, and the number they publish for faults and emergencies is 13 19 62. Use it for conductors on the road or in a yard, crackling connections on a pole, a transformer issue, or a blackout that has taken several houses or a whole stretch of Loganlea, Browns Plains or Beenleigh with it. Watch their outage information if you can do so safely. Stay away from anything that has fallen; “it looks dead” is not a test you can perform from the driveway.
After a wide outage, it is sensible to switch off or unplug major appliances so they do not all restart together, and to use a torch rather than candles in rooms full of packing or window furnishings. If you have rooftop solar, use the shutdown steps in the inverter manual. None of that is a substitute for Energex restoring the network, and none of it is work we perform.
Water into older timber and brick
In Springwood, Daisy Hill, Shailer Park, Kingston and parts of Beenleigh, roofs and eaves on older timber or brick houses can drip onto light fittings and into wall cavities after a short, violent dump of rain. If a fitting is wet, keep clear of it. If you can reach the board from a dry place and can identify the lighting circuit or the main switch, isolating that circuit reduces the chance of a shock when someone tries a wall switch. If the board itself is wet, leave it, keep people out of that area, and treat spreading smoke as a 000 call.
Humidity that lingers for days after the cell has passed can also trip safety switches as moisture sits in an outdoor socket, a garden light or a tired exhaust. One careful reset, with no smell and no heat, can tell you whether the event was momentary. A switch that will not hold needs a licensed Queensland electrical contractor, not a nightly reset ritual.
Surges and the quiet damage after the lights return
When a feeder comes back, some households find a board that seems fine and a cluster of dead appliances, or a safety switch that now misbehaves. Mention that sequence on any enquiry, because it is useful context. Insurance, if you have it, often wants photographs and a contractor’s written account of what was damaged; we do not lodge claims and we do not write those reports, but the contractor you engage might document what they saw. Keep wet devices unplugged.
Yarrabilba, Flagstone and other still-growing estates
These southern estates are on the same Energex network, but the on-the-ground experience can include temporary construction supplies in unfinished stages, new boards that are still almost empty of occupant-added load, and streets that are not obvious to visitors after dark. If your stage is still under active building, say so, and describe how to find the lot. A trip that began when several air-conditioners started on a humid afternoon is a different story from a roof leak in a 1980s timber house, and the contractor should hear the right story.
Builders’ temporary power and incomplete earthing in a neighbouring lot are not something to investigate yourself. If the problem seems to involve building work next door, keep your distance and include that observation in the enquiry or in the Energex call, depending on whether the street or only your board is affected.
After the weather has cleared
Walk the yard in daylight for damaged aerials, hanging branches over the service, or outdoor fittings full of water, but do not touch them. Photograph from a distance if you need records. Test leftover torches and consider a simple outlet-safe surge protector conversation later with a licensed contractor; we will not sell you one. If anything still smells of heat, do not close the door on it and hope.
- Should I call Energex and also send an enquiry?
- If the street is dark or a line is down, Energex on 13 19 62 comes first. If they restore the street and your house alone stays dead, or if only your house was ever affected, an enquiry about a licensed contractor is the house-side path. You can mention any Energex reference number you were given.
- Rain got into a ceiling light in an older Springwood house. Can I dry it with a hairdryer?
- No. Keep clear, isolate the circuit if you can do that from a dry board, and have a licensed Queensland electrical contractor assess it. Introducing another appliance, and your hands, to a wet fitting is the wrong kind of initiative.
- Is a “surge” automatically the distributor’s fault?
- Not automatically. Some events are network-related and some start inside the installation. Energex can speak to the network event; a licensed contractor can speak to the damage in the board or the appliances, if you engage one. This site will not allocate blame.
If the fault is inside your Logan property, send an enquiry. We connect people who ask with one or more licensed Queensland electrical contractors. We do not carry out electrical work ourselves.
Send an Enquiry